iFi Audio Zen DAC V2 manual

iFi Audio Zen DAC V2
9.1 · 1
PDF manual
 · 1 pagina
Inglés
manualiFi Audio Zen DAC V2

7. Balanced 4.4mm analogue output

This is an analogue output via 4.4mm > XLR or other balanced

interconnects. You could use this for an active speaker or an amplifier.

Tip: As ZEN DAC is balanced, this is the recommended output.

8. Variable/Fixed switch

When the rear UnBAL/BAL analogue outputs are used, this switch

will determine whether or not ZEN DAC analogue volume control

is used.

9. RCA analogue output

10. USB-audio and power input

This is a USB input. It connects ZEN DAC to the computer audio

source and provides the power supply.

11. DC 5V power

ZEN DAC is powered by 5 volts, either via the enclosed USB cable

(for connection to laptop or PC) or DC power supply (not included).

Tip: For best performance upgrade the USB power supply to a super-low noise
power adapter such as iFi iPower or iPower X.
Note: For use with PC it is necessary to download drivers.
Tip: For all latest firmware updates please refer to our website here:
www.ifiaudio.com/downloads/

ZEN DAC

Thank you for purchasing the DAC from ZEN series. The DAC is a

balanced USB-audio DAC amplifier.

1. PowerMatch (high/low)

PowerMatch setting should be on low for IEMs and on high for

on/over headphones.

Warning: Due to the high power of ZEN DAC, before changing the PowerMatch
setting, always start off at a low volume level so that there is no risk of damage to
your headphones, speakers or your hearing. iFi audio is not responsible for any
hearing or equipment damage from misuse.

2. TrueBass (high/low)

Many headphones lack the correct bass response. TrueBass is an

analogue circuit designed to 'add back' the lost bass response

for the most accurate playback.

Tip: Open-back headphones and some IEMs usually sound better with TrueBass
set high. Adjust to suit.

3. Analogue Volume control

The analogue volume control in ZEN DAC is superior to any

digital volume control. It can be used to control the headphone

volume or the pre-amplifier volume (when set to 'Variable'). If the

output at the rear is set to 'Fixed' the volume control is bypassed.

4. Audio Format LED (kHz)

The LED colour scheme indicates the audio format and sampling

frequency received by ZEN DAC from the music source.

LED Mode

Yellow PCM 44.1/48kHz

White PCM 88.2/96/176.4/192/352.8/384kHz

Cyan DSD 64/128

Red DSD 256

Green MQA

Blue MQA Studio

Magenta Original Sample Rate*

*MQB

5. Single-ended 6.3mm output

Connect single-ended 6.3mm headphones. With single-ended

3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.

6. Balanced 4.4mm analogue output

Connect balanced 4.4mm headphones.

Tip: As ZEN DAC is balanced, we recommend the 4.4mm output.

Ver1.0

ifi-audio.com

POWE R MATCH
TRUE BASS
2 3 51 64

Specification

Input: USB3.0 B Socket (USB2.0 compatible)
Formats: 44.1/48/88.2/96/176.4/192/352.8/384kHz PCM
2.8/3.1/5.6/6.2/11.2/12.4MHz DSD
353/384KHz DXD
MQA
DAC: Bit-Perfect DSD & DXD DAC by Burr Brown
Line Section
Output:
Balanced 4.4mm: 2V / 6.2V max. (variable) 4.2V fixed
UnBAL RCA: 1V / 3.3V max. (variable) 2.1V fixed
Zout:
Balanced: <= 200Ω
UnBAL: <= 100Ω
SNR: <-116dB(A) @ 0dBFS (UnBAL/BAL)
DNR: >116dB(A) @ -60dBFS (UnBAL/BAL)
THD+N: <0.0015% @ 0dBFS (UnBAL/BAL)
Headphone Section
Output:
Balanced 4.4mm: 2V / 6.2V max. 12Ω - 600Ω
UnBAL 6.3mm: 1V / 3.3V max. 12Ω - 300Ω
Output Power:
Balanced: >380mW @ 50Ω; >70mW @ 600Ω
UnBAL: >280mW @ 32Ω; >36mW @ 300Ω
Output Impedance: <1Ω (UnBAL/BAL)
THD+N: <0.005% (125mW @ 32Ω)
SNR: >113dBA (3.3V UnBAL / 6.2V BAL)
Power consumption: No Signal ~0.5W
Max Signal ~2.5W
Dimensions: 158 x 117 x 35 mm
6.2" x 4.6" x 1.4"
Weight: 491 g (1.08 lbs)
Warranty period: 12 months
Specifications are subject to change without notice.
7 8 9 10 11
V2

Manual

Ver el manual de iFi Audio Zen DAC V2 aquí, gratis. Este manual pertenece a la categoría No categorizado y ha sido calificado por 1 personas con un promedio de 9.1 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre iFi Audio Zen DAC V2 o necesitas ayuda? Haz tu pregunta aquí

Índice

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el iFi Audio y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de Samsung Galaxy A7 proporcionarle una buena respuesta.

Número de preguntas: 0

iFi Audio Zen DAC V2 especificaciones

A continuación encontrará las especificaciones del producto y las especificaciones del manual del iFi Audio Zen DAC V2.

General
Marca iFi Audio
Modelo Zen DAC V2
Producto No categorizado
Idioma Inglés
Tipo de archivo PDF

Preguntas frecuentes

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el iFi Audio Zen DAC V2 más abajo.

¿No aparece tu pregunta? Haz tu pregunta aquí

No hay resultados